GTA
PCP - HPA - C02 Gate => QB-7X Gate -W/Co2 & HPA => : brian45 November 27, 2006, 06:13:44 AM
-
found this site
http://www.airgunartisans.com/OddJobBreech.htm
does anyone think it could be used on a qb might have a go on the lathe to see if i can make one
-
Well Brian, I know some people who would give there eye teeth for the concept... hehehe. We even have one or two members, I think from UK who are looking into making just that. Great idea but I am not a Airgunsmith or Machinest Engineer, so I would be lost after the point of touching and feeling it... hehe
I am sure some more members will chime in on this. Thanyou for your great post..
Gene
-
Just kidding, not a new concept, I had a Daisy 922 with a simlar slide to side clip idea, although it wasn't auto-magic like that one. That is pretty close to the idea we were talking about a few months ago, QB clip(see below). If I only had a hammer, I could hammer in the morning, I could.......but if I had a mill....hehe, then we might see something interesting. Unforunately the only mill I have access to is at work, and they sorta frown on me bringing stuff from home into work on it. What if I drew it up, maybe someone here could make it a reality? Don't think anoyone at work would mind me using their Catia workstation to draft something...on my lunch break of course:) Huhm, that would require me to polish my Catia skills....huhm, no good either....., but I can draft by hand, 3 sided view? Anyone?
That is one purty breach though,
Dan
-
Seems to be much like the set up on an IZH-61, works good if it doesn't leak.