GTA

General Discussion To Gateway To Airguns => The Shop => : pindog2000 January 19, 2010, 12:42:17 PM

: stock refinishing
: pindog2000 January 19, 2010, 12:42:17 PM

Hey fellas im looking for someone who can do stock refinishing ?picked up a 890s and i want to redo the stock can anyone help me out?

: RE: stock refinishing
: shadow January 19, 2010, 12:49:30 PM

Ok brothers and sister's a family member need's some stock work done and I know that there's some Guru's with wood around here so if you would check in with him and see what you wood Guru's can come with. Thanks family. Ed

: RE: stock refinishing
: pindog2000 January 19, 2010, 12:51:44 PM

yes help me out

: RE: stock refinishing
: SDale January 19, 2010, 02:27:38 PM

Whatcha need done?

: RE: stock refinishing
: pindog2000 January 19, 2010, 03:35:40 PM

picked up a 890s gamo the stock has some dings i want to get it reworked

: RE: stock refinishing
: SDale January 19, 2010, 03:52:04 PM

Head to home depot for some sand paper, a cheap orbital sander, stain and finish... Then throw on your reading glasses and tune in to GTA hehe. Theres LOTS of stock finishing info here. Plus, theres nothing better than looking at something that YOU yourself finished or made.... It's a great feeling!

: Re: stock refinishing
: howie1a January 20, 2010, 12:30:03 AM

If you are looking for a re finish, re carve or just a new stock I'm sure I can help. Howie (( ihowie1a@yahoo.com  )) PS take a look at the post below a RWS 35 ( note it should have been a 34 ) it's some of my work.

: RE: stock refinishing
: TCups January 20, 2010, 05:07:30 AM

Think I am going to refinish my own stock on a Remington 511.  I looked here:

http://www.battenfeldtechnologies.com/miles-gilbert/catalog.asp?ShowLarge=stock-refinishing-kit

and even watched the video . . .    hmmm . . .   probably too much work for me.

Then I checked out Jim Maccari's site:

http://www.airrifleheadquarters.com/page/page/251486.htm

Ordered up some New-Royal London Oil, synthetic steel wool pads, and Maccari Stock Mud.  I may pick up an inexpensive sander:

http://www.homedepot.com/Tools-Hardware-Power-Tools-Sanders-Polishers/h_d1/N-5yc1vZ1xr5Zaqht/R-100607606/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

or, maybe:

http://www.homedepot.com/Tools-Hardware-Power-Tools-Sanders-Polishers/h_d1/N-5yc1vZ1xr5Zaqht/R-100519984/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053

: Re: stock refinishing
: howie1a January 20, 2010, 05:41:57 AM

their is a post in our library on how to varnish  a stock  down the left side of the page . Howie