GTA
General Discussion To Gateway To Airguns => China Gate => : Furseeker May 09, 2010, 01:59:54 PM
-
Guys I need some help from some of you that have a lot of experience with the BAM type rifles. I have a B25 in .22 caliber, the bamboo stocked version. Anyway when I cock it it will only engage when I pull the trigger at the bottom of the cocking stroke. I has a only a few rare occasions cocked with doing the trigger pull thing, but 98% of the time I have to pull the trigger to get it to fully engage. I had it apart last night and everything looked normal but upon re assembly it still act the same way. Any ideas?
-
Hrmmm thats odd... Have not seen the inside of one though so I would be afraid to hazard a guess of anykind...
-
you should call or email mike melick cause im sure thats who you got it from
-
for some reason the trigger isn't engaging the sear, if you have the adjustment screw all the way in it could cause this or possibly a defective safety. have you done any polishing of the trigger parts? or removed the safety??? Contact me at 515-924-3699 or e-mail me at flyingdragonairrifles@hotmail.com
-
If the trigger in the B25 is the same as the Diana's T-05 trigger, I'd say chances are good that the sear plates aren't/weren't placed in correctly. That or the adjustment screw on the blade is over adjusted too tight. Can you add any other info on the rifle?? tjk