GTA
PCP - HPA - C02 Gate => PCP DarkSiders Forum => : paul October 16, 2007, 12:17:17 PM
-
Getting my list together,so far Talon, Hand pump, do i need the high rings or med. rings, and is the tri-rail base required or only if i mount acces. I,m going with scope only,so do i need tri-rail.. Thanks,paul
-
Paul on the Two Talons I had , I used the 3/8 to weaver adapters with high Weaver double strap rings . You're going to need something extra high because of the way the bottle comes out from the stock . It puts your cheek high and to be comfortable you'll need higher than normal rings . The tri-base is not necessary , as a matter of fact Jon had one on the Talon he had and took it off, he didn't like it. kirby
-
Hey, Paul, my Talon is setup with the B-Square adjustable riser base, here's a link: http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=299 , and Accushot 2 pc. high mounts. This works well for me, gets my eye nicely lined up with the scope I'm using, a Simmons 44 Mag. You could probably accomplish the same thing by going with the B-Square ultra-high mount, here's another link: http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=224. Hope this helps, and good luck.
Dave
-
Thanks Kirby and Dave for the advice and recommendations, Paul.
-
I have a tri rail on my Talon SS. It raises the height so it is likely regular rings will work fine for you. I have a light which I can mount on either side of the scope on the tri rail. Don't forget the frame has an upper and lower dovetail in addition to the scope base. I have a laser on the upper frame rail. The tri rail makes the overall gun more rigid. I think it is a good and cheap accessory--29 dollars as I recall. I think you are gonna like it.
-
My tri-rail was very far out of alignment and added alot of weight to the rifle. I'd go with high or extra high mounts instead, the trial is un-needed in my opinion.